Weicon MOULD RELEASE AGENT Silicone-Free Lubricant And Release Agent 400ML
Silicone-free lubricant and release agent
The high-quality combination of active ingredients consisting of pure natural products has a high sliding effect, which prevents its adhesion to plastics, moulds, metals and tools.
Weicon Mould Release Agent can be used in plastic processing and for spraying, pressing, and vacuum deforming.
Color: TRANSPARENT
Weight(KG): 0.400
Weicon Repair-Sticks cover gaps of max. 15 mm per procedure.
The pot life given is for a material quantity of 25 g at room temperature.
If larger quantities are used, the curing time will be faster due to the typical reaction heat of epoxy resins (exothermic reaction).
Similarly, higher ambient temperatures shorten the cure time (as a rule of thumb, every +10°C increase above room temperature will halve working and curing time).
Temperatures below +16°C will extend working and curing times considerably, while below about +5°C, no reaction will take place at all.
TDS : Weicon MOULD RELEASE AGENT Silicone-Free Lubricant And Release Agent 400ML
sales@hardwarecity.com.sg
+65 6266 0802
