Timbermate Woodfiller is an Interior grade 4 in 1 Woodputty, Grainfiller, Edgefiller and Crackfiller. When thinned slightly with water can also be used as a sanding sealer.
Timbermate does not shrink, sink, crack or fall out and has an indefinite shelf life. It is non-flammable, non-toxic and can be used to the last gram.
The secret ingredient of Timbermate is tap water therefore containing no Acrylic, Latex or Solvents.
Timbermate comes in 13 premixed colours plus Natural Tint Base.
Timbermate takes all types of known stains, varnishes and coatings.
The Timbermate formula is over 85 years old and is the only genuine water-based formula in the world proving that the formulation has stood the test of time.
Applications
Filler/Putty fills cracks, knots, pin and screw holes, splits, blemishes, etc. Fill deep holes in layers allowing time for each layer to dry. Will not blind natural wood grain. Drying time is about 30 minutes. Timbermate dries hard and smooth without shrinking or sinking and can be belt or drum sanded as it is not affected by heat, the hotter it gets the harder and faster it sets and that means less "Down Time."
You can speed dry Timbermate by adjusting the surrounding air temperature. This can be done by using either hot air, heat lamps, or kiln ovens. Timbermate can be mixed with any stains before or after filler is dry. To match medium and darker shades mix with Natural, Pine or other light shades.
Use white Timbermate only for white top coats.
Characteristics
Timbermate is manufactured to a unique, genuinely water-based formula proven globally for over 50 years.
Timbermate is recommended for interior use. For certain exterior applications consider using Earls Powder Putty
Timbermate is non-flammable, non-toxic and non-yellowing
Timbermate is completely compatible with acid catalysed lacquers, as well as all known lacquers, top coatings and P.U. Fills cracks in masonry, plaster, flooring, drywall,brick, concrete, fibreglass, plastic or metal. Can be mixed with woodglues. Being water-based v is non-flammable and contains no acetone, toxic or harmful ingredients. Also, Timbermatewill take varnish, urethane, wax, polish, lacquer, linseed, and other oils.
Timbermate can handle screwing, planing, cutting, drilling and sawing.
For variable consistency: May be thickened by leaving tub open or thinned by merely adding water to required consistency. Indefinite shelf and pot life, therefore.... no waste
Features
No Waste, Usable to the last drop. If tub dries out just add water to soften.
Won't Shrink, Sink, Crack or Fall Out.
Suitable for use in all Timbers including Particle Board M.D.F. (Custom Wood)
Plaster Board, Flooring, Panelling etc.
Can be used as Wood Putty, Sanding Sealer, Prime Coat, Grainfiller, Crackfiller, Undercoat & Edge Filler all in one.
Available in 13 Timber Tones plus Natural. Use White for top coats only.
Can be tinted in wet state or overstained when dry. Use any type of Colorant i.e. Water Based Spirit based ochers etc.
Easy sanding, will not clog paper when DRY Sanded dust can be mixed with water for re-use.
Fast drying approx. 20-30 min, but can be heat dried with a heat gun or lamp for faster drying. Temperature can affect drying time.
Clean hands or tools with water.
Non Flammable, Non Toxic,Non Yellowing.
Solvent, Latex and Acrylic Free.
Heat Proof and Freezeproof.
Provides a strong foundation for all top coats inc. Single & two pack products polyurethane's, oils, acrylics, french polish wax etc.
Takes nails, screws, planing, sawing, drilling and routing
Can be used on Metal,Plastic, Fibreglass and in Foundries.
Weight(KG): 1.000
No Waste, Usable to the last drop. If tub dries out just add water to soften.
Won't Shrink, Sink, Crack or Fall Out.
Suitable for use in all Timbers including Particle Board M.D.F. (Custom Wood)
Plaster Board, Flooring, Panelling etc.
Can be used as Wood Putty, Sanding Sealer, Prime Coat, Grainfiller, Crackfiller, Undercoat & Edge Filler all in one.
Available in 13 Timber Tones plus Natural. Use White for top coats only.
Can be tinted in wet state or overstained when dry. Use any type of Colorant i.e. Water Based Spirit based ochers etc.
Easy sanding, will not clog paper when DRY Sanded dust can be mixed with water for re-use.
Fast drying approx. 20-30 min, but can be heat dried with a heat gun or lamp for faster drying. Temperature can affect drying time.
Clean hands or tools with water.
Non Flammable, Non Toxic,Non Yellowing.
Solvent, Latex and Acrylic Free.
Heat Proof and Freezeproof.
Provides a strong foundation for all top coats inc. Single & two pack products polyurethane's, oils, acrylics, french polish wax etc.
Takes nails, screws, planing, sawing, drilling and routing
Can be used on Metal,Plastic, Fibreglass and in Foundries.