Convert Rust to a Tough Black Coating to Give Better Wear and Tear Protection
Provides Long Term Indoor or Outdoor Protection
Easy Application
Ready to Use
Saves Time and Labour
Non-Flammable
Application For Use
Mr McKenic Magic Rust Converter can be used on any metal surface being corroded. It is widely used in maintenance workshops, oil rigs, military vehicles, onboard vessels, shipyards, metal tanks and piping in refineries etc.
Color: Creme (Dries Black)
Weight(KG): 1.000
Directions For Use
Remove all loose rust with a wire-brush. Scrap off to a thin layer before application if the rust is too thick.
Ensure that surface is cleaned and oil-free before application.
Shake Bottle well before use.
Using a brush or roller, apply a generous layer of Mr McKenic® -Magic Rust Converter onto the rusty surface.
Leave it for at least 8 hours to cure thoroughly. To accelerate curing process, apply & leave it under the sun.
For maximum protection, apply 2 layers of coats.
If re-painting is required, apply 1 coat and paint over.
For much enhanced protection, apply Mr McKenic Zinc Galvanising Compound.
sales@hardwarecity.com.sg
+65 6266 0802
