HOW TO USE
For best results, ensure surfaces are dry, clean and free from dust and grease
1. If using on leather soles, lightly roughen the surfaces to be bonded with fine-grade sandpaper
2. Apply glue evenly to both surfaces
3. Leave until almost dry (about 10 minutes) then press both surfaces together firmly
4. Replace cap immediately after use to prevent the adhesive becoming unusable
5. A flexible bond is developed after 1 hour
6. Maximum bond strength is achieved after approximately 24 hours
HOW TO USE
For best results, ensure surfaces are dry, clean and free from dust and grease
1. If using on leather soles, lightly roughen the surfaces to be bonded with fine-grade sandpaper
2. Apply glue evenly to both surfaces
3. Leave until almost dry (about 10 minutes) then press both surfaces together firmly
4. Replace cap immediately after use to prevent the adhesive becoming unusable
5. A flexible bond is developed after 1 hour
6. Maximum bond strength is achieved after approximately 24 hours